welcome to Ameya-Auma

WATER SUPPLY:

Raw Water Application / Storm Water Application / Clear Water Application / Booster Water Application

BHR / BHQ / BHM / BHK/ BHMa / BHA
Vertical Turbine Pumps

Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design.

Features:

Vibration-free performance
Low submergence
No priming required
Dry pit/Wet pit arrangement available
Direct drive/Right angle gear drive
Impeller pull-out/Non-pull-out
Bowl pull-out/Non-pull-out
Gland packed / Mechanical seal
50Hz / 60Hz availability

Applications:

Water supply Pumps
Irrigation Pumps
Cooling tower
Thermal and Nuclear power plants
Steel, Cement industries
Refineries
Sea water on off-shore platforms
Condensate extraction
Fire fighting Pumps
Flood control
Dry Docks

Specification:

Delivery size up to 2200 mm
Capacity up to 40,000 m3 /hr
Head up to 200 m

Storm Water Application /Clear Water Application / Booster Water Application
SCT (Extended)
Axially Split Case Pumps

These are horizontally axially split casing, single stage, double suction or single suction pumps with horizontal shaft and detachable stuffing box called insert with horizontal axially split volute type. The impeller is accurately balanced by double or single suction. These pumps are used in handling water with slight impurities, petroleum refineries, conditioning and refrigeration system and so on.

Specification:

Delivery size up to 350 mm
Capacity up to 4500 m3 /hr
Head up to 330 m
Temperature (-) 10 °C to 100 °C

Application:

Water/Liquids with slight impurities
Petroleum refineries
Air-conditioning and refrigeration systems
Fire protection systems and mining
Pump axis horizontal or vertical

Features:

Gland packed / Mechanical seal
50HZ / 60 HZ availability

Storm Water Application / Clear Water Application /Booster Water Application
DSM / DSMT Axially Split Case Pumps

These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on.

Features:

Gland packed / Mechanical seal
50HZ / 60 HZ availability

Application:

Water supply
Air-conditioning
Power plants
Mine drainage
Irrigation
Fire fighting

Specification:

Delivery size up to 150 mm
Capacity up to 470 m3 /hr
Head up to 180 m
Temperature (-) 10 °C to 90 °C

Storm Water Application/ Clear Water Application / Booster Water Application
UP / UPL / UPH / UP (T) Axially Split Case Pumps

These pumps are gland packed and have mechanical seal. These are mainly used in water supply, irrigation, power plants and can have delivery size up to 1100 mm.

Features:

Gland packed / Mechanical seal
50HZ / 60 HZ availability

Application:

Water Supply
Irrigation
Air-conditioning
Power plants
Paper, Sugar, Textile mills
Fire fighting

Specification:

Delivery size up to 1100 mm
Capacity up to 20,000 m� /hr
Head up to 160 m
Temperature (-) 10 °C to 90 °C

Clear Water Application /Booster Water Application
RKB Horizontal Multistage pump

RKB is a multistage centrifugal side suction, vertical delivery, horizontal pump with diffuser type casing. Pump shaft is supported in anti-friction bearings. Enclosed impellers are of radial flow type provided with balancing holes. These pumps have standard lubrication of grease and are suitable for coupling with electric motors.

Features:

Gland Packed / Mechanical Seal
50 Hz / 60 Hz availability

Applications:

Fire-fighting
Booster Service
Mine Dewatering
Boiler feed

Specification:

Delivery size up to 250 mm
Capacity up to 850 m3 /hr
Heads up to 850 m
Temperature (-) 40 °C to 140 °C

Clear Water Application /Booster Water Application
MN / MLA Horizontal Multistage Pump

These are single suction, horizontal shaft, high pressure multistage pumps, consisting of ring section diffuser casings bolted between suction and delivery casing with enclosed type impeller. These are ideal for sprinkler irrigation, fire-fighting, water supply in high rise buildings and so on.

Features:

Gland packed / Mechanical seal
50Hz / 60 Hz availability

Application:

Irrigation
Fire-fighting
Booster Service
Mine Dewatering

Specification:

Delivery size up to 300 mm
Capacity up to 1000 m3 /hr
Head up to 750 m
Temperature (-) 10 °C to 140 °C

Clear Water Application /Booster Water Application
CF Channel Flow Pump

These pumps are of multistage and have a modular construction. These are either gland packed or mechanically sealed and can be of either electrical drive or engine drive. These are widely used in air conditioning, boiler feed, petroleum, chemical and process industries and so on.

Features:

Conforming to DIN 24254
Flanges to DIN 2501 PN 40
Channel Multistage, Modular Construction
Self priming
Gland Packed / Mechanical Seal
Electrical Drive / Engine Drive

Application:

Petroleum, Chemical and Process Industry
Air Conditioning
Boiler Feed
Domestic
Ship/Naval Engineering
Liquid with Gas mixture

Specification:

Delivery size up to 50 mm
Capacity up to 20 m3 /hr
Head up to 315 m
Temperature (-) 40 °C to 120 °C

Miscellaneous Services
DB Utility Pump

With a back pull out design these pumps are gland packed or mechanically sealed and are used for air conditioning, booster service, fire fighting and sprinkler system. Delivery size varies from 32 mm to 150 mm.

Features:

Conforming to DIN 24255
Back pull-out design
Gland packed / Mechanical seal
50HZ / 60 HZ availability

Application:

Air Conditioning
Sprinkler systems
Fire fighting
Booster service

Specification:

Delivery size up to 150 mm
Capacity up to 550 m³ /hr
Head up to 100 m
Temperature (-) 10 °C to 100 °C

Miscellaneous Services
KOS Openwell Submersible Pumps

Kirloskar KOS pump is an openwell submersible pump in cast iron construction. It has wide applications in agriculture and domestic segment.

Features:

Pump bearings are water lubricated
Wet type submersible motor
Water-cooled and water lubricated

Application:

Agriculture
Irrigation
Sprinkler irrigation
Water supply

Specification:

Delivery size up to 100 mm (4")
Capacity up to 110 m3 /hr
Head up to 64 m
Power rating 2.2 kW to 7.5 kW (3 hp to 10 hp)

Miscellaneous Services
KOS M Submersible Pumps

These pumps are designed for underwater applications and hence no need of priming and foot valve. These are easy to install and can withstand voltage variation from 350-440 volts. These are designed to prevent overloading and motor burning. These pumps find great use in submerged pumps in fountains, wells, sumps, and water links, water supply for domestic use in high rise apartments and in industries for clear water handling. Designed for underwater applications with CED coated wetted components for long life and rust free operation.

Features:

Designed for underwater applications: no need for priming and foot valve
Easy installation - foundation and installation platform not required
Can withstand wide voltage fluctuations from 160 to 260 Volts
Non overloading power characteristics: no fear of motor burning out
Dynamically balanced rotating parts ensure minimum vibrations
Replaceable wear and tear parts and hence longer life
Easy maintenance and spares availability: needs only one spanner for maintenance
CED coated wetted components for long life and rust free operations
More hygienic operations for drinking water

Application:

Water supply for fountains, sumps and water tanks
Water supply for use in apartments, buildings and hotels
Gardening and small farm irrigation

Specification:

Technical Specifications
- Head : 8 to 38 metres
- Capacity : 11 to 0.4 LPS
- Power Ratings : 0.37 to 1.5 kW (0.5 to 2.0 HP)
- Voltage Range : 160 to 260 V
Material of Construction (Standard Supply)
- Impeller : Cast Iron
- Delivery Casing : Cast Iron
- Motor Body : Cast Iron
- Shaft : Stainless Steel

Miscellaneous Services
CE Utility Pump

These pumps are of single stage with back pull out type suitable for 3500 rpm. These are either gland packed or mechanically sealed and delivery size can be up to 125 mm. These are very useful in air conditioning, water supply, fire-fighting and booster services.

Features:

Confirming to DIN 24256 and ISO 2858
Single stage with back pull-out type design
Suitable for 3500 rpm
Gland Packed / Mechanical Seal

Application:

Air conditioning
Fire fighting
Booster services
Water supply
Sprinkler system
Handling clear and turbid water up to 3000 ppm

Specification:

Delivery size up to 125 mm
Capacity up to 660 m³ /hr
Head up to 100 m
Temperature up to (-) 10 °C to 140 °C

Miscellaneous Services
CPHM Utility Pump

These pumps can be driven by electric motor or engine. The impellers are of enclosed type and are balanced statically and dynamically. The casing has axial suction and top centre line delivery. Smooth hydraulic passages ensure high efficiency

Features:

Conforming to DIN 24256, ISO 2858
Back pull-out design
Gland Packed / Mechanical Seal
50 Hz / 60 Hz availability

Application:

Booster Service
Fire fighting
Air-conditioning

Specification:

Delivery size up to 200 mm
Capacity up to 750 m3 /hr
Head up to 150 m
Temperature (-) 30 °C to 90 °C

Let's Connect With Us

News

Links

Contact Us